Formulatrix Tempest V3.1 Liquid Handler Nanoliter Multichannel Reagent Dispenser

Internal part number 56822

For Sale Formulatrix Tempest V3.1 Liquid Handler Nanoliter Multichannel Reagent Dispenser

Fully Functional
Serviced & in Stock
Current Model
Good cosmetic condition
Technical sales consultation available
WARRANTY

Here is what you will receive:

Formulatrix Tempest V3.1 Liquid Dispenser
12 chips total installed (5 high volume and 7 low volume)
Vacuum Pump
Plate Stacker Tower (Qty:2)
Computer with Tempest v3.5
Communication and power cables

Formulatrix Tempest V3.1 Liquid Handler Configuration:

Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom)
Version 3 has upgraded plate clearance to accommodate dispensing into deep well blocks
Volume range: 200nL with no upper limit
Dispense Method: non-contact micro-diaphragm dispense chips (Qty. up to 12)
12 chips total installed, including High and Low volume: 5 high volume and 7 low volume
Max reagents: dispense up to 12 different reagents; 96 independently controlled outputs.
Features: independent channel control, can unclog itself, two separate wash inputs, removable nozzles, can dispense beads/cells
Dispense rate for 200 nL to 96-well plate: ~3 seconds
Dispense rate for 200 nL to 384-well plate: ~6 seconds
Dispense rate for 5 uL to 96-well plate: ~4 seconds
Dispense rate for 1 uL to 384-well plate: ~5 seconds
Dispense rate for 10 uL to 384-well plate: ~9 seconds
Dispense rate for 20 uL to 384-well plate: ~13 seconds
Microfluidic chip dead volume: less than 40 uL
Pipette tip dead volume: less than 100 uL
Stackers supports nearly all SBS-footprint plates, including 24-, 96-, 384-, and 1536-well plates.
Plate capacity: 24 SBS plates (based on 14.35 mm plate height).
The stackers are 350 mm tall and the system is bidirectional, enabling plates to be cycled in from either stacker.
Power requirements: 100-240 VAC, 50-60 Hz, 125 W
Pressure: 30-35 psi @ 0.15 cfm = 2.0 bar @ 4.3 lpm
Vacuum: 22 inHg @ 0.2 cfm= -750 mbar @ 5.7 lpm
Dimensions (WxDxH): 55.5 x 32.5 x 26.5 cm. | 22 x 13 x 10.5 in.
Weight: ~11.5 kg | ~25 lb

Customization/Options: N/A

Testing performed by our in-house service team:

The Formulatrix Tempest V3.1 Liquid Handler passed all tests and was found to be fully functional:

We checked that the system successfully powered on and completed the initialization sequence.
We established software communication and ensured that all components responded without errors.
We ran the system’s prime and wash procedures to confirm smooth and consistent fluid flow.
We verified fluid retrieval to ensure it accurately drew the specified volumes from the reservoirs.
We checked for accurate fluid dispensing, confirming that actual dispensed volumes matched programmed values.
We tested and confirmed variable volume output across the full dispensing range, validating both accuracy and repeatability.
We tested plate detection by loading multiple plate types to verify the system’s accuracy in recognizing plate presence, orientation, and compatibility.
We verified the plate carrier’s X and Z-axis movements, ensuring they were smooth and precise over the full range.
We verified the dispenser head's Y-axis movement, confirming it was smooth and correctly aligned over the wells.
We performed a full system performance test, simulating an end-to-end workflow to ensure cohesive operation across all functions.

Instrument Overview:

Formulatrix Tempest V3.1 Liquid Handler offers precise liquid handling for accurate results.
With high-throughput capability, it ensures efficient sample processing.
The intuitive software interface makes the operation user-friendly.
Versatile dispensing options cater to a wide range of applications.
This instrument provides fast and accurate dispensing.
Count on its reliable performance for consistent outcomes.

Instrument Application:

High Throughput Screening (HTS)
Assay Development and Design of Experiment (DoE)
Enzyme-linked immunosorbent Assays (ELISA)
Polymerase Chain-reaction (PCR) Workflows - Real-time and Digital
Biochemical assay development and screening
Cell Culture and Bead-Based Assays
Next Generation Sequencing (NGS) - Library Preparation

The Key Features:

High Precision
Low Volume Dispensing
Minimize Reagent Waste
Speed and Throughput
Keep Cells and Beads Suspended
Integrate with External Systems

Additional technical info:

Brochure: Formulatrix Tempest V3.1 Liquid Handler Brochure

Video Overview:

About us

How we pack

Why do so many customers choose to order from us?

Our Advantage

We have experience servicing and repairing these instruments.
This instrument goes through all the described service steps before shipping. see questions section below
We offer detailed photos and videos of the instruments you buy.
We are an approved pre-owned equipment vendor to many large US, Canadian, and EU Universities.
We are an approved pre-owned equipment vendor to many Fortune 500 US and International Biopharma companies.
Technical sales consultation available
Remote installation and instrument operation training may be available.
On-site installation may be available in the Boston Area (New England area)
US or International shipping is no problem (see the shipping tab on how we pack and feel at ease)

Our Guarantee

Warranty
You get after-sales technical support
Customer references are available
The instrument will be fully functional!
Smooth process from the initial quote to order fulfillment

This will ship via freight. Please contact us with your zip code to obtain a shipping quote.

*SM* Small Crate
200#

PLEASE NOTE THAT THE QUESTIONS BELOW ARE ANSWERED IN MORE THOROUGH DETAIL ON OUR WEBSITE

Q: Can I view this instrument in person at your facility or do a live Zoom demo before it is shipped to me?
A: We can accommodate both in-person or Zoom demos.

Q: What about the warranty?
A: The instrument comes fully warranted for both parts and labor.

Q: Do you offer installation, service, etc?
A: We offer remote installation and training packages to familiarize you with this instrument.

Q: What should I watch out for when buying a used/pre-owned instrument from another lab?
A: Ensure that the instrument is in good working condition with no damage or wear that could affect its performance. Ask for details about testing steps performed, video demo, and test screenshots.

Q: Do you have more than one of these instruments on hand?
A: We generally carry multiple instruments on hand, along with a variety of spare parts.

Q: This procurement is for a University or College. Are purchase orders with NET terms accepted?
A: We accept purchase orders from all major US and Canadian universities.

Q: How fast will you ship?
A: We can ship within a few days to two weeks. Shipping time depends on the current demand for our instruments. Members of our sales team will be able to offer current delivery estimates.

Q: Will my instrument be insured during shipping?
A: Absolutely! We insure all our shipments as long as we are the shipper. If a customer ships on their account, they handle insurance.

Q: How do you pack? Have you previously packed and shipped the fragile laboratory instruments?
A: We have extensive experience shipping high-end and complex laboratory instruments in the US and Internationally.

Q: Do you ship Internationally?
A: Yes! We have shipped to multiple continents and over 30 countries.

Q: How much will I save buying it pre-owned, and is it worth it?
A: When compared to buying a new instrument, you will save 60% or more and have plenty of funds left over for an additional instrument or two.

Scorpion SBS plate handler

Filter By

Price Range

Listing Type

Condition

Category

Manufacturer

Become a member and enjoy exclusive benefits